Number |
Document Code / Revision Status |
Document Name |
|
|
|
1 |
Euramet cg 2 / 02-03.2011 |
Calibration of gauge block comparators |
2 |
Euramet cg 3 / 01-03.2011 |
Calibration of pressure balances |
3 |
Euramet cg 4 / 02-03.2011 |
Uncertainty of force measurements |
4 |
Euramet cg 6 / 02-03.2011 |
Extent of calibration for cylindrical diameter standards |
5 |
Euramet cg 7 / 01-06.2011 |
Calibration of oscilloscopes |
6 |
Euramet cg 8 / 02.1-10.2011 |
Calibration of termocouples |
7 |
Euramet cg 10 / 02.1-12.2012 |
Determination of pitch diameter of parallel thread gauges by mechanical probing |
8 |
Euramet cg 11 / 02.0-03.2011 |
Calibration of temperature ındıcator |
9 |
Euramet cg 12 / 02.0-03.2011 |
Calibration of vector network analysers |
10 |
Euramet cg 13 / 03.0-02.2015 |
Calibration of temperature block calibrators |
11 |
Euramet cg 14 / 02.0-03.2011 |
Calibration of static torque |
12 |
Euramet cg 15 / 03.0-02.2015 |
Calibration of digital multimeters |
13 |
Euramet cg 16 / 02.0-03.2011 |
Estimation of uncertainty hardness |
14 |
Euramet cg 17 / 03.0-04.2017 |
Calibration of electromechanical and mechanical manometers |
15 |
Euramet cg 18 / 04.0-11.2015 |
Calibration of non-automatic weighing instruments |
16 |
Euramet cg 19 / 02.1-03.2012 |
Determination of uncertainty in gravimetric volume |
17 |
Euramet cg 20 / 04.0-02.2015 |
Calibration of temperature and humidity |
18 |
Euramet cg 21 / 01.0-04.2013 |
Calibration of standard capacity measures using the volumetric method |
19 |
Dkd-r-6-1 / 01-2013 |
Calibration of pressure gauges |
20 |
Dkd-r-5-7 / 07-2004 |
Calibration of climatic chambers |
21 |
Oıml-r-133 / 2002 |
Liquid in glass thermometers |
22 |
Iso 6789 / 02-2017 |
Requirements for calibration and determination of measurement uncertainty |
23 |
Iso 6789 / 01-2017 |
Requirements and methods for design conformance testing and quality conformance testing: minimum requirements for declaration |
24 |
BS EN ISO 4787 / 03-2011 |
Laboratory glassware-volumetric instruments-methods for testing of capacity and for use |
25 |
BS EN ISO 2811 / 1-2016 |
Paints and varnishes-determination of densit-pycnometer method |
26 |
EN ISO 385 / 04-2005 |
Laboratory glassware-burettes |
27 |
ISO 648 / 10-2008 |
Laboratory glassware - single-volumepipettes |
28 |
ISO 835 / 04-2007 |
Laboratory glassware - graduated pipettes |
29 |
ISO 1042 / 08-1999 |
Laboratory glassware - one-mark-volumetric flasks |
30 |
EN ISO 2811 / 1 -2001 |
Paints and varnishes - determination of density pyknometer method |
31 |
ISO 3507 / 04-1999 |
Laboratory glassware-pyknometers |
32 |
ISO 3585 / 07-1998 |
Borosilicate glass 3.3 - properties |
33 |
ISO 3696 / 04-1987 |
Water for analytical laboratory use specification and test methods |
34 |
EN ISO 4787 / 03-2011 |
Laboratory glassware - volumetric instruments - methods for testing of capacity and for use |
35 |
ISO 4788 / 05-2005 |
Laboratory glassware-Graduated measuring cylinders |
36 |
EN ISO 8655-1 / 09-2002 |
Piston-operated volumetric apparatus |
37 |
EN ISO 8655-2 / 09-2002 |
Piston-operated volumetric apparatus |
38 |
EN ISO 8655-6 / 09-2002 |
Piston-operated volumetric apparatus - gravimetric methods for the determination of measurement error |
39 |
ISO/TR 20461 / 11-2000 |
Determination of uncertainty for volume measurements made using the gravimetric method |
40 |
OIML R 120 / 2010 |
Standard capacity measures for testing measuring systems for liquids other than water |
41 |
VDI/VDE/DGQ 2618-Blatt 1.1 / 2001-12 |
Instructions to inspect measuring and test equipment for geometrical quantities |
42 |
VDI/VDE/DGQ 2618-Blatt 1.2 / 2003-12 |
Instructions for the inspection of measuring and test equipment for geometrical quantities Uncertainty of measurement |
43 |
VDI/VDE/DGQ 2618-Blatt 3.1 / 2004-01 |
Test instruction for gauge blocks |
44 |
VDI/VDE/DGQ 2618-Blatt 4.1 / 2007-02 |
Test instruction for conıcal gauges |
45 |
VDI/VDE/DGQ 2618-Blatt 4.2 / 2007-07 |
Test instruction for pins screws |
46 |
VDI/VDE/DGQ 2618-Blatt 4.7 / 2005-06 |
Test instruction for gap gauges |
47 |
VDI/VDE/DGQ 2618-Blatt 4.8 / 2006-04 |
Setting plugs, plug gauges and test plugs for cylindrical threads |
48 |
VDI/VDE/DGQ 2618-Blatt 4.9 / 2006-04 |
Test instruction for setting rings and ring gauges for cylindrical threads |
49 |
VDI/VDE/DGQ 2618-Blatt 12.4 / 2006-07 |
Test instruction for conıcal gauges |
50 |
VDI/VDE/DGQ 2618-Blatt 09.1 / 2006-03 |
Test instruction for callipers |
51 |
VDI/VDE/DGQ 2618-Blatt 09.2 / 2006-03 |
Test instruction for depth callipers |
52 |
VDI/VDE/DGQ 2618-Blatt 09.3 / 2006-03 |
Test instruction for height callipers |
53 |
VDI/VDE/DGQ 2618-Blatt 10.1 / 2006-11 |
Test instructions for micrometers |
54 |
VDI/VDE/DGQ 2618-Blatt 10.3 / 2002-08 |
Test instructions for micrometers with dial indicator |
55 |
VDI/VDE/DGQ 2618-Blatt 10.8 / 2002-08 |
Test instructions for internal micrometers with three-point contact |
56 |
VDI/VDE/DGQ 2618-Blatt 11.2 / 2002-08 |
Test instructions for dial indicators for linear measurement with mechanical indication |
57 |
VDI/VDE/DGQ 2618-Blatt 11.3 / 2002-09 |
Test instructions for lever gauges |
58 |
VDI/VDE/DGQ 2618-Blatt 12.1 / 2005-02 |
Test instruction for lever gauges (quicktests) for external measurement |
59 |
VDI/VDE/DGQ 2618-Blatt 13.1 / 2005-02 |
Test instructions for lever gauges (quicktests) for internal measurements |
60 |
VDI/VDE/DGQ 2618-Blatt 13.2 / 2005-11 |
Test instructions for bore gauges - 2 point |
61 |
VDI/VDE/DGQ 2618-Blatt 7.2 / 2008-07 |
Test instructions for protractors |
62 |
VDI/VDE/DGQ 2618-Blatt 10.4 / 2008-12 |
Test instructions for mıcrometer heads |
63 |
VDI/VDE/DGQ 2618-Blatt 4.4 / 2009-09 |
Test instructions for reference gauge |
64 |
VDI/VDE/DGQ 2618-Blatt 6.1 / 2009-09 |
Test instructions for optical flats |
65 |
VDI/VDE/DGQ 2618-Blatt 16.1/ 2009-10 |
Test instructions for height gauges |
66 |
VDI/VDE/DGQ 2618-Blatt 10.2/ 2010-04 |
Test instructions for micrometers for screw thread measurement |
67 |
VDI/VDE/DGQ 2618-Blatt 10.5/ 2010-08 |
Test instructions for depth micrometers |
68 |
VDI/VDE/DGQ 2618-Blatt 10.6/ 2010-08 |
Test instructions for height micrometers |
69 |
VDI/VDE/DGQ 2618-Blatt 10.7/ 2010-08 |
Test instructions for internal micrometers with 2 point contact |
70 |
VDI/VDE/DGQ 2618-Blatt 14.1/ 2010-08 |
Test instructions for electrical linear measuring |
71 |
VDI/VDE/DGQ 2618-Blatt 7.1/ 2011-12 |
Test instructions for steel squares |
72 |
VDI/VDE/DGQ 2618-Blatt 5.2/ 2013-12 |
Test instructions for knife edge straight edges |
73 |
VDI/VDE/DGQ 2618-Blatt 5.1/ 2013-09 |
Test instructions for straight edges |
74 |
VDI/VDE/DGQ 2618-Blatt 11.1/ 2014-09 |
Test instructions for mechanical dial gauges |
75 |
ASTM E 275 / 08-2013 |
Standard practice for describing and measuring performance of ultraviolet and visible spectrophotometers |